STEP7连接与上传下载程序

发表于 2012-7-9 13:15:15

在PLCDEV看到的一篇文章，介绍了如何使用STEP7 Manager连接S7-300/400PLC和上传、下载程序。
我简单翻译了一下，中文版见PDF文档：

STEP7连接与上传下载程序.rar 下载次数:522

英文原版见word文档：

Step 7 Connecting, Downloading and Uploading.doc 下载次数:111

发表于 2012-7-9 16:30:40

贴上部分原文，看看是否是您需要的：
Step 7 Connecting, Downloading and Uploading

These are general guidelines for connecting, downloading and uploading from an S7-300 or S7-400 PLC. The following procedures were created using Siemens SIMATIC STEP 7 version 5.4 software.
To start, open the SIMATIC Manager.

Connecting to the S7 PLC
The Programming Cables
There are three major types of programming cables:
1. The CP5512 card in a PCMCIA slot.

2. The PC Adapter using a serial or USB connection

3. An Ethernet cable

The CP5512 card and the PC Adapter can communicate on either an MPI or PROFIBUS port. Note that PROFIBUS is labeled as DP on the Siemens connection ports. These cables can piggyback on existing connectors. Be aware that the PC Adapter draws its power to work from the connection port so check the power LED for proper operation. The CP5512 card draws its power from the computer.
For Ethernet (TCP/IP) use a standard Ethernet cable from the computer to a CPU with an Ethernet port, a CP 343/443 module or a network switch all ready attached to the PLC network.
-------------------------------------
不足之处请指正！

发表于 2012-7-9 19:46:05

谢谢提供！

发表于 2012-7-9 23:01:30

谢谢提供

发表于 2012-7-10 02:16:55

谢谢楼主上传资料。

发表于 2012-7-10 05:32:20

谢谢楼主分享！

发表于 2012-7-10 08:47:45

楼主你真好，学习了

发表于 2012-7-10 12:03:10

非常的感谢

发表于 2012-7-10 15:18:35

谢谢楼主！

发表于 2012-7-10 18:34:00

好资料，谢谢楼主

帐号		自动登录	找回密码
密码			加入工控之家

STEP7连接与上传下载程序

浏览过的版块